Vertical Fluted Cooling Tower PVC Fills

Vertical Fluted Cooling Tower PVC Fills

Material: PP
Flute size: 12/15/19 mm
Sample: Available

Get Quote

  • Description

Vertical Fluted Cooling Tower PVC Fills

The principle of operation of cooling tower fill is to put as much water surface area in contact with as much air as possible, for the longest amount of time possible. Film fills allow the water to form thin flowing sheets to expose as much water surface area as possible to the interacting flow.

Cooling tower sheet fills or media, come in many different forms and “micro-structures,” each having unique characteristics to fit various applications. Film fills are selected for direct replacement, performance enhancement, and water condition compatibility. Each fill has performance characteristics that allow selections to be made for various heat loads, flow rates, water quality, and horse power combinations.

Offset fluted fills, also called cooling tower vertical offset fills, which combine low-fouling property of vertical flow with the enhanced water distribution of cross fluted designs. The fill modules are solvent welded design for maximum strength and pack integrity. The media is used for various application where water quality is average, such as power, steel, food processing, chemical, etc.

Specs

  • Material: PP, PVC
  • Surface area: 147.8 m2/m3.
  • Sheet spacing: 20.8 mm.
  • Media pack size:
    • Depth: 300-600 mm.
    • Width: 127-458 mm.
    • Length: 305-3050 mm.

Features

  • High thermal performance.
  • Resistant to UV, corrosion, organic/inorganic acids, alkali and chemicals that normally found in the cooling tower waters.
  • Reduced pressure drop and low fouling potential.
  • Bonded edge with dedicated bond points for added strength and durability.
  • Most versatile fill for use in varying water qualities while maintaining high performance.

Application 
Offset fluted fills are widely used in counter-flow cooling towers in power, chemical, food processing, refining applications where water contains a moderate level of total suspended solids.

Contact US:

SINTA could build mold and manufacture cooling tower infills according to clients’ request. Color normally is black, blue, grey. green, etc. with different sheet thickness from 0.2-0.5 mm. Welcome to contact us!

Get Support Or Price

Enquiry

 

Verification

CATEGORY AND TAGS:

Related Items